Achieve scenes at your set time
Other popular Brilliant Smart workflows and automations
-
-
-
If light is turned on, then turn on light
1
-
-
turn off device
6
-
-
Activate your favorite scene with the flic button
-
-
Turning on - Location
-
-
When I exit an area, turn off all lights
14
-
-
When temp is low, turn on the heater
-
-
Turn on device with Alexa
6
-
-
If virtual switched on, then activate scene
1
-
Build your own Brilliant Smart and UbiBot automations
Triggers (If this)
-
(Universal) Any Channel Field Value Rises above or Drops below
This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Temperature Rises above or Drops below
This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Humidity Rises above or Drops below
This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
Light Rises above or Drops below
This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Voltage Rises above or Drops below
This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
External Power Supply is Up or Down
This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Device is offline
This trigger fires when your UbiBot device is offline.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Motion is Detected or Undetected from Motion Sensor
This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
External-DS18B20-Temperature-Probe-1 Rises above or Drops below
This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
External-DS18B20-Temperature-Probe-2 Rises above or Drops below
This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)
-
Person is detected
This trigger fires when PIR detects person.
-
External-TH30S-Probe-Temperature Rises above or Drops below
This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
-
Leak detected
This trigger fires when water leak detected.
-
External-TH30S-Probe-Humidity Rises above or Drops below
This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
-
Sound and light detected
This trigger fires when water sound and light detected.
-
External-Soil-Probe-Moisture Rises above or Drops below
This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.
-
External-Soil-Probe-Temperature Rises above or Drops below
This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.
-
External-PT100-Probe Temperature Rises above or Drops below
This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.
-
Vibration Index Rises above or Drops below
This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.
-
Carbon Dioxide (CO2) Rises above or Drops below
This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.
(Universal) Any Channel Field Value Rises above or Drops below
This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Temperature Rises above or Drops below
This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Humidity Rises above or Drops below
This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
Light Rises above or Drops below
This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Voltage Rises above or Drops below
This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
External Power Supply is Up or Down
This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Device is offline
This trigger fires when your UbiBot device is offline.
Battery low
This trigger fires when residual electricity in the lock under threshold.
Motion is Detected or Undetected from Motion Sensor
This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.
Door sensor is open
This trigger fires when the door sensor is open.
External-DS18B20-Temperature-Probe-1 Rises above or Drops below
This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).
Door sensor is closed
This trigger fires when the door sensor is closed.
External-DS18B20-Temperature-Probe-2 Rises above or Drops below
This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)
Person is detected
This trigger fires when PIR detects person.
External-TH30S-Probe-Temperature Rises above or Drops below
This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
Leak detected
This trigger fires when water leak detected.
External-TH30S-Probe-Humidity Rises above or Drops below
This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
Sound and light detected
This trigger fires when water sound and light detected.
External-Soil-Probe-Moisture Rises above or Drops below
This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.
External-Soil-Probe-Temperature Rises above or Drops below
This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.
External-PT100-Probe Temperature Rises above or Drops below
This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.
Vibration Index Rises above or Drops below
This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.
Carbon Dioxide (CO2) Rises above or Drops below
This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.
Queries (With)
-
History of device or group is turned on
This query returns a list of when the specified device/group was turned on.
-
History of vibration index rises above or drops below threshold
This query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
-
History of door sensor is closed
This query returns a list of when the door sensor was closed.
-
History of light crossed a threshold
This query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.
-
History of unlocks
This query returns a list of when user unlocked the lock, his password or fingerprint identification or card was confirmed.
-
History of External-Soil-Probe-Moisture Rises above or drops below
This query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
-
History of person is detected
This query returns a list of when PIR detects person.
-
History of Sensor Data Received
This query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.
-
History of camera detects sound
This query returns a list of when the specified camera detects sound.
-
History of leak detected
This query returns a list of when water leak detected.
-
Recent history of Door sensor is open
This query returns a list of recent times the door sensor was open.
History of device or group is turned on
This query returns a list of when the specified device/group was turned on.
History of vibration index rises above or drops below threshold
This query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
History of door sensor is closed
This query returns a list of when the door sensor was closed.
History of light crossed a threshold
This query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.
History of unlocks
This query returns a list of when user unlocked the lock, his password or fingerprint identification or card was confirmed.
History of External-Soil-Probe-Moisture Rises above or drops below
This query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
History of person is detected
This query returns a list of when PIR detects person.
History of Sensor Data Received
This query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.
History of camera detects sound
This query returns a list of when the specified camera detects sound.
History of leak detected
This query returns a list of when water leak detected.
Recent history of Door sensor is open
This query returns a list of recent times the door sensor was open.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
(Universal) Send Command to Any Channel
Send Action Command to Any Target Channel
-
Activate Scene
This action will activate the specified scene.
-
(Universal) Send RAW Command to Any Channel
Send Action RAW Command to Any Target Channel
-
Set light brightness
This action will set your light to a specified brightness.
-
Turn On or Off your UbiBot Smart Plug
Send Action Command to Turn On or Off your UbiBot Smart Plug
-
Turn off
This action will turn off the device/group of your choosing.
-
Turn On or Off your Network Relay Switch
Send Action Command to Turn On or Off your UbiBot Network Relay Switch
-
Set light color
This action will set the light to specified color.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
(Universal) Send Command to Any Channel
Send Action Command to Any Target Channel
Activate Scene
This action will activate the specified scene.
(Universal) Send RAW Command to Any Channel
Send Action RAW Command to Any Target Channel
Set light brightness
This action will set your light to a specified brightness.
Turn On or Off your UbiBot Smart Plug
Send Action Command to Turn On or Off your UbiBot Smart Plug
Turn off
This action will turn off the device/group of your choosing.
Turn On or Off your Network Relay Switch
Send Action Command to Turn On or Off your UbiBot Network Relay Switch
Set light color
This action will set the light to specified color.
Start Heat Mode
This action will set your AC to Heat Mode.
Start Cool Mode
This action will set your AC to Cool Mode.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
How to connect Brilliant Smart and UbiBot
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Brilliant Smart and UbiBot accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together