Switch on fan that cools solar inverter
Other popular Ambient Weather workflows and automations
-
-
-
It's too sunny to have the lights on
4
-
-
Get an email when a new Ambient Weather Applet is published
94
-
-
Close your Hunter Douglas blinds when it's too hot
1
-
-
Turn off the Rachio sprinklers and send a gmail alert when it starts raining.
10
-
-
Change the hue lights color and dim lights when parameter is above a given value.
1
-
-
If Ambient weather station rain > .12, then retract Somfy awning
-
-
Turn off the sprinklers and blink the hue lights when it starts raining
-
-
When Ambient Weather Daily Rain rises above #, set Rachio Rain delay to # days and stop watering
9
-
Build your own Ambient Weather and Smart Life automations
Triggers (If this)
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Device stops reporting
This trigger fires when your device hasn't reported for 20 minutes.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
Outdoor Temperature rises above
This trigger fires when the outdoor temperature rises above a given value.
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Outdoor Temperature falls below
This trigger fires when the Outdoor Temperature falls below a given value.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Wind Speed rises above
This trigger fires when the wind speed rises above a given value.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
UV rises above
This trigger fires when the UV Index rises above a given value.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Daily Rain rises above
This trigger fires when the Daily Rain measurement rises above a given threshold.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Parameter rises above
This trigger fires when a given parameter exceed a given threshold.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
Parameter falls below
This trigger fires when a given parameter falls below a certain threshold.
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Person is detected
This trigger fires when PIR detects person.
-
Leak detected
This trigger fires when water leak detected.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Shake detected
This trigger fires when sensor shake detected
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Device stops reporting
This trigger fires when your device hasn't reported for 20 minutes.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
Outdoor Temperature rises above
This trigger fires when the outdoor temperature rises above a given value.
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Outdoor Temperature falls below
This trigger fires when the Outdoor Temperature falls below a given value.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Wind Speed rises above
This trigger fires when the wind speed rises above a given value.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
UV rises above
This trigger fires when the UV Index rises above a given value.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Daily Rain rises above
This trigger fires when the Daily Rain measurement rises above a given threshold.
Battery low
This trigger fires when residual electricity in the lock under threshold.
Parameter rises above
This trigger fires when a given parameter exceed a given threshold.
Door sensor is open
This trigger fires when the door sensor is open.
Parameter falls below
This trigger fires when a given parameter falls below a certain threshold.
Door sensor is closed
This trigger fires when the door sensor is closed.
Person is detected
This trigger fires when PIR detects person.
Leak detected
This trigger fires when water leak detected.
Sound and light detected
This trigger fires when water sound and light detected.
Shake detected
This trigger fires when sensor shake detected
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of Wind Speed rises above threshold
This query returns a list of when the wind speed rose above a given value. Note: this query will only return future events after this Applet is created.
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of Outdoor Temperature drops
This query returns a list of when the Outdoor Temperature has fallen below the given value. Note: this query will only return future events after this Applet is created.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of Device not reporting alerts
This query returns a list of events when your device stopped reporting for at least 20 minutes.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of outdoor temperature rising above a temperature
This query returns a list of when the outdoor temperature rose above a given value. Note: this query will only return future events after this Applet is created.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of parameter falls
This query returns a list of events when the parameter fell below a certain threshold. Note: this query will only return future events after this Applet is created.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of Parameter exceeds threshold
This query returns a list of events when a given parameter exceed a given threshold. Note: this query will only return future events after this Applet is created.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of Daily Rain rises above
This query returns a list of when the Daily Rain measurement rises above a given threshold. Note: this query will only return future events after this Applet is created.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of when UV rose above a threshold
This query returns a list of when the UV Index rose above a given value. Note: this query will only return future events after this Applet is created.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of Wind Speed rises above threshold
This query returns a list of when the wind speed rose above a given value. Note: this query will only return future events after this Applet is created.
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of Outdoor Temperature drops
This query returns a list of when the Outdoor Temperature has fallen below the given value. Note: this query will only return future events after this Applet is created.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of Device not reporting alerts
This query returns a list of events when your device stopped reporting for at least 20 minutes.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of outdoor temperature rising above a temperature
This query returns a list of when the outdoor temperature rose above a given value. Note: this query will only return future events after this Applet is created.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of parameter falls
This query returns a list of events when the parameter fell below a certain threshold. Note: this query will only return future events after this Applet is created.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of Parameter exceeds threshold
This query returns a list of events when a given parameter exceed a given threshold. Note: this query will only return future events after this Applet is created.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of Daily Rain rises above
This query returns a list of when the Daily Rain measurement rises above a given threshold. Note: this query will only return future events after this Applet is created.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of when UV rose above a threshold
This query returns a list of when the UV Index rose above a given value. Note: this query will only return future events after this Applet is created.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
Turn off
This action will turn off the device/group of your choosing.
-
Activate Scene
This action will activate the specified scene.
-
Set light brightness
This action will set your light to a specified brightness.
-
Set light color
This action will set the light to specified color.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
Turn off
This action will turn off the device/group of your choosing.
Activate Scene
This action will activate the specified scene.
Set light brightness
This action will set your light to a specified brightness.
Set light color
This action will set the light to specified color.
Start Cool Mode
This action will set your AC to Cool Mode.
Start Heat Mode
This action will set your AC to Heat Mode.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
How to connect Ambient Weather and Smart Life
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Ambient Weather and Smart Life accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together