Sonos Will Start When You Come Home
Other popular Total Connect 2.0 workflows and automations
-
-
-
Call My Office When Alarm Going Off
6
-
-
Turn Phillips Hue lights Red when Alarm detected
-
-
If Security System has been set to Armed Away, then arm The nest Blink system
-
-
Make sure oven off when leave home.
-
-
Adjust Thermostat When You Leave Home
-
-
Send a Notification When Alarm Going Off
-
-
Start Roomba When You Leave Home
5
-
-
Turn off Rachio Sprinklers when you leave home.
-
Build your own Total Connect 2.0 and Smart Life automations
Triggers (If this)
-
Device or group is turned on
This trigger fires when the specified device/group is turned on.
-
Total Connect security panel arming mode has changed
This trigger fires when my Total Connect security panel has been armed or disarmed.
-
Device or group is turned off
This trigger fires when the specified device/group is turned off.
-
Total Connect security panel alarm detected
This trigger fires when my Total Connect security panel receives an alarm
-
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
-
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
-
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
-
Battery low
This trigger fires when residual electricity in the lock under threshold.
-
Door sensor is open
This trigger fires when the door sensor is open.
-
Door sensor is closed
This trigger fires when the door sensor is closed.
-
Person is detected
This trigger fires when PIR detects person.
-
Leak detected
This trigger fires when water leak detected.
-
Sound and light detected
This trigger fires when water sound and light detected.
-
Shake detected
This trigger fires when sensor shake detected
Device or group is turned on
This trigger fires when the specified device/group is turned on.
Total Connect security panel arming mode has changed
This trigger fires when my Total Connect security panel has been armed or disarmed.
Device or group is turned off
This trigger fires when the specified device/group is turned off.
Total Connect security panel alarm detected
This trigger fires when my Total Connect security panel receives an alarm
Unlock the lock
This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.
Camera detects sound
This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.
Input incorrect password repetitiously
This trigger fires when someone input incorrect password repetitiously.
Battery low
This trigger fires when residual electricity in the lock under threshold.
Door sensor is open
This trigger fires when the door sensor is open.
Door sensor is closed
This trigger fires when the door sensor is closed.
Person is detected
This trigger fires when PIR detects person.
Leak detected
This trigger fires when water leak detected.
Sound and light detected
This trigger fires when water sound and light detected.
Shake detected
This trigger fires when sensor shake detected
Queries (With)
-
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
-
History of Total Connect security panel alarm detections
This query returns a list of when my Total Connect security panel received an alarm
-
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
-
History of Total Connect security panel arming mode has changed
This query returns a list of when my Total Connect security panel was been armed or disarmed.
-
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
-
History of when a Person was detected
This query returns a list of when PIR detected person.
-
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
-
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
-
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
-
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
-
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
-
History of Shake detected
This query returns a list of when sensor detected a shake
-
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
-
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
-
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
History of Leak detected
This query returns a list of times when the sensor detected a water leak.
History of Total Connect security panel alarm detections
This query returns a list of when my Total Connect security panel received an alarm
History of when Door sensor was closed
This query returns a list of times when the door sensor was closed.
History of Total Connect security panel arming mode has changed
This query returns a list of when my Total Connect security panel was been armed or disarmed.
History of when Door sensor was open
This query returns a list of times when the door sensor was open.
History of when a Person was detected
This query returns a list of when PIR detected person.
History of Device turned off
This query returns a list of times when the specified device/group was turned off.
History of Device was turned on
This query returns a list of when the specified device/group was turned on.
History of repetitious incorrect password alerts
This query returns a list of times when someone input an incorrect password repetitiously.
History of motion detections by Camera
This query returns a list of when a Camera detected motion. To use this query, Camera motion detected should be turned on.
History of Camera detected sound
This query returns a list of times when the specified camera detected sound. To use this query, camera’s sound detection must have been turned on.
History of Shake detected
This query returns a list of when sensor detected a shake
History of when lock unlocked
This query returns a list of when a user unloocked the lock and his password, fingerprint identification, or card was confirmed.
History of Sound or Light Detected
This query returns a list of when water sound or light were detected.
History of low Battery alerts
This query returns a list of when residual electricity in the lock dropped below the threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Turn on
This action will turn on the device/group of your choosing.
-
Arm my Honeywell Total Connect security panel
This action will arm your Honeywell Total Connect security system to Stay or Away mode.
-
Turn off
This action will turn off the device/group of your choosing.
-
Run a Smart Scene in my Total Connect security panel
This action will run a Smart Scene in your Honeywell Total Connect security panel.
-
Activate Scene
This action will activate the specified scene.
-
Set light brightness
This action will set your light to a specified brightness.
-
Set light color
This action will set the light to specified color.
-
Start Cool Mode
This action will set your AC to Cool Mode.
-
Start Heat Mode
This action will set your AC to Heat Mode.
-
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
-
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
-
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
Turn on
This action will turn on the device/group of your choosing.
Arm my Honeywell Total Connect security panel
This action will arm your Honeywell Total Connect security system to Stay or Away mode.
Turn off
This action will turn off the device/group of your choosing.
Run a Smart Scene in my Total Connect security panel
This action will run a Smart Scene in your Honeywell Total Connect security panel.
Activate Scene
This action will activate the specified scene.
Set light brightness
This action will set your light to a specified brightness.
Set light color
This action will set the light to specified color.
Start Cool Mode
This action will set your AC to Cool Mode.
Start Heat Mode
This action will set your AC to Heat Mode.
Set AC temperature
This action will set your AC to a specified temperature by remote controller.
Turn on oscillation function of fan
This action will turn on the oscillation function of your fan by IR remote controller.
Turn off oscillation function of fan
This action will turn off the oscillation function of your fan by IR remote controller.
How to connect Total Connect 2.0 and Smart Life
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Total Connect 2.0 and Smart Life accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together