Adjust thermostat when you leave a specific location
Other popular Heatmiser workflows and automations
-
11
-
-
Get an email when Heatmiser publishes a new trigger or action
34
-
-
If you click the Flic button, then enable Away on your Heatmiser
1
-
-
Activate Standby Mode on the selected Heatmiser Thermostat when Apilio triggers and action (6)
-
-
When you enter a specific area set your Heatmiser Thermostat to __°
10
-
-
Low Outside Temp Heating Boost
14
-
-
Sonoff Thermostat heating switch
-
-
Send an email to boost your thermostat timer
2
-
-
Arriving Home - Lights On
3
-
Build your own Heatmiser and WeMo Smart Plug automations
Triggers (If this)
-
Temperature rises above
This Trigger fires every time the temperature rises above a threshold you specify.
-
Switched on
This Trigger fires every time your WeMo Switch is turned on.
-
Temperature drops below
This Trigger fires every time the temperature drops above a threshold you specify.
-
Switched off
This Trigger fires every time your WeMo Switch is turned off.
-
neoHub Away Mode
This trigger fires when your neoHub is set to away mode.
-
neoHub Home Mode
Triggers when your neoHub returns to Home Mode.
-
Low Battery
This trigger fires when your Heatmiser Device has a Low Battery.
-
Contact Sensor Closed
This trigger fires when the Contact Sensor is closed
-
Contact Sensor Open
This trigger fires when the Contact Sensor is opened
Temperature rises above
This Trigger fires every time the temperature rises above a threshold you specify.
Switched on
This Trigger fires every time your WeMo Switch is turned on.
Temperature drops below
This Trigger fires every time the temperature drops above a threshold you specify.
Switched off
This Trigger fires every time your WeMo Switch is turned off.
neoHub Away Mode
This trigger fires when your neoHub is set to away mode.
neoHub Home Mode
Triggers when your neoHub returns to Home Mode.
Low Battery
This trigger fires when your Heatmiser Device has a Low Battery.
Contact Sensor Closed
This trigger fires when the Contact Sensor is closed
Contact Sensor Open
This trigger fires when the Contact Sensor is opened
Queries (With)
Actions (Then that)
-
Cancel temperature hold
This Action will cancel a temperature hold on the selected Heatmiser Thermostat.
-
Turn on
This Action will turn a WeMo Switch on. If the WeMo Switch is already on, it will remain on.
-
Set temperature hold
This Action will enable a temperature hold on the selected Heatmiser Thermostat.
-
Turn off
This Action will turn a WeMo Switch off. If the WeMo Switch is already off, it will remain off.
-
Turn neoPlug on
This Action will allow you to switch on the selected neoPlug.
-
Turn on then off
This Action will turn a WeMo Switch on then immediately back off.
-
Turn neoPlug off
This Action will turn off the selected neoPlug.
-
Turn off then on
This Action will turn a WeMo Switch off then immediately back on.
-
Set Temperature
The Action will set the temperature on the selected Heatmiser Thermostat.
-
Toggle on/off
This Action will toggle a WeMo Switch on or off.
-
Boost Timer
This Action will activate a Timer Boost on the selected Heatmiser Timer.
-
Set Away Mode
This Action will activate Away Mode on your neoHub
-
Set Home Mode
The Action will activate Home Mode on your neoHub.
-
Set Standby Mode
This Action will activate Standby Mode on the selected Heatmiser Thermostat.
-
Cancel Standby Mode
This Action will cancel Standby Mode on the selected Heatmiser Thermostat.
-
Run Profile
This action will send a stored profile to the selected thermostat.
-
Run recipe
This action will run a Heatmiser Neo recipe.
Cancel temperature hold
This Action will cancel a temperature hold on the selected Heatmiser Thermostat.
Turn on
This Action will turn a WeMo Switch on. If the WeMo Switch is already on, it will remain on.
Set temperature hold
This Action will enable a temperature hold on the selected Heatmiser Thermostat.
Turn off
This Action will turn a WeMo Switch off. If the WeMo Switch is already off, it will remain off.
Turn neoPlug on
This Action will allow you to switch on the selected neoPlug.
Turn on then off
This Action will turn a WeMo Switch on then immediately back off.
Turn neoPlug off
This Action will turn off the selected neoPlug.
Turn off then on
This Action will turn a WeMo Switch off then immediately back on.
Set Temperature
The Action will set the temperature on the selected Heatmiser Thermostat.
Toggle on/off
This Action will toggle a WeMo Switch on or off.
Boost Timer
This Action will activate a Timer Boost on the selected Heatmiser Timer.
Set Away Mode
This Action will activate Away Mode on your neoHub
Set Home Mode
The Action will activate Home Mode on your neoHub.
Set Standby Mode
This Action will activate Standby Mode on the selected Heatmiser Thermostat.
Cancel Standby Mode
This Action will cancel Standby Mode on the selected Heatmiser Thermostat.
Run Profile
This action will send a stored profile to the selected thermostat.
Run recipe
This action will run a Heatmiser Neo recipe.
How to connect Heatmiser and WeMo Smart Plug
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Heatmiser and WeMo Smart Plug accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together