Kino
by
Other popular Hager IoT workflows and automations
-
-
-
Turn Off Devices When You Leave Home
-
-
Activate Inspinia scenario with Hager IoT Alarms
-
-
Switch on a device at sunset
15
-
-
Switch on a device using Alexa
97
-
-
Switch off a device using Alexa
59
-
-
Backofen an bei Hager IOT
-
-
Get an email when Hager IoT publishes a new trigger or action
129
-
-
When I get close to home, run Welcome Home scene
101
-
Build your own Hager IoT and iRobot automations
Triggers (If this)
-
Device switched on
This Trigger fires every time your device is switched on.
-
Job Complete
This trigger fires when your robot completes a job.
-
Device switched off
This Trigger fires every time your device is switched off.
-
Robot Started
This trigger fires when your robot starts a job.
-
Player state changes
This Trigger fires every time your device player's state changes to the value you specified.
-
Robot Stuck
This trigger fires when your robot is stuck.
-
Brightness level rises above
This Trigger fires every time your device detects a brightness level above the value you specified.
-
Bin full
This trigger fires when your robot's bin is full.
-
Brightness level drops below
This Trigger fires every time your device brightness level is below the value you specified.
-
Room Traversal
This trigger fires when your robot starts driving through one room to reach another room.
-
Binary switch turns on
This Trigger fires every time your device's binary switch is turned on.
-
Room Traversal Complete
This trigger fires when your robot has finished driving through one room to reach another room.
-
Binary switch turns off
This Trigger fires every time your device's binary switch is turned off.
-
Room Started
This trigger fires when your robot starts cleaning a room.
-
CO2 level rises above
This Trigger fires every time your device detects a CO2 level above the value you specified.
-
Room Finished
This trigger fires when your robot finishes cleaning a room.
-
CO2 level drops below
This Trigger fires every time your device detects a CO2 level below the value you specified.
-
Humidity level rises above
This Trigger fires every time your device detects humidity levels higher than the threshold you specified.
-
Humidity level drops below
This Trigger fires every time your device detects humidity levels lower than the threshold you specified.
-
Luminescence level rises above
This Trigger fires every time your device detects luminescence levels higher than the value you specified.
-
Luminescence level drops below
This Trigger fires every time your device detects a luminescence level below the value you specified.
-
Rain indicator turns on
This Trigger fires every time your device's rain indicator turns on.
-
Rain indicator turns off
This Trigger fires every time your device's rain indicator turns off.
-
Weather Station reports day
This trigger fires when the Weather Station reports day.
-
Weather Station reports night
This trigger fires when the Weather Station reports night.
-
Temperature rises above
This Trigger fires every time your device detects temperatures above the value you specified.
-
Temperature drops below
This Trigger fires every time your device detects a temperature below the value you specified.
-
Volume level rises above
This Trigger fires every time your device detects a volume level above the value you specified.
-
Volume level drops below
This Trigger fires every time your device volume level is below the value you specified.
-
Wind speed rises above
This Trigger fires every time your device detects wind speed higher than the value you specified.
-
Wind speed drops below
This Trigger fires every time your device detects wind speed lower than the value you specified.
-
Battery below
This Trigger fires every time your device's battery level falls below the value you specified.
-
Alarm turns on
This Trigger fires every time your device's alarm is turned on.
-
Alarm turns off
This Trigger fires every time your device's alarm is turned off.
Device switched on
This Trigger fires every time your device is switched on.
Job Complete
This trigger fires when your robot completes a job.
Device switched off
This Trigger fires every time your device is switched off.
Robot Started
This trigger fires when your robot starts a job.
Player state changes
This Trigger fires every time your device player's state changes to the value you specified.
Robot Stuck
This trigger fires when your robot is stuck.
Brightness level rises above
This Trigger fires every time your device detects a brightness level above the value you specified.
Bin full
This trigger fires when your robot's bin is full.
Brightness level drops below
This Trigger fires every time your device brightness level is below the value you specified.
Room Traversal
This trigger fires when your robot starts driving through one room to reach another room.
Binary switch turns on
This Trigger fires every time your device's binary switch is turned on.
Room Traversal Complete
This trigger fires when your robot has finished driving through one room to reach another room.
Binary switch turns off
This Trigger fires every time your device's binary switch is turned off.
Room Started
This trigger fires when your robot starts cleaning a room.
CO2 level rises above
This Trigger fires every time your device detects a CO2 level above the value you specified.
Room Finished
This trigger fires when your robot finishes cleaning a room.
CO2 level drops below
This Trigger fires every time your device detects a CO2 level below the value you specified.
Humidity level rises above
This Trigger fires every time your device detects humidity levels higher than the threshold you specified.
Humidity level drops below
This Trigger fires every time your device detects humidity levels lower than the threshold you specified.
Luminescence level rises above
This Trigger fires every time your device detects luminescence levels higher than the value you specified.
Luminescence level drops below
This Trigger fires every time your device detects a luminescence level below the value you specified.
Rain indicator turns on
This Trigger fires every time your device's rain indicator turns on.
Rain indicator turns off
This Trigger fires every time your device's rain indicator turns off.
Weather Station reports day
This trigger fires when the Weather Station reports day.
Weather Station reports night
This trigger fires when the Weather Station reports night.
Temperature rises above
This Trigger fires every time your device detects temperatures above the value you specified.
Temperature drops below
This Trigger fires every time your device detects a temperature below the value you specified.
Volume level rises above
This Trigger fires every time your device detects a volume level above the value you specified.
Volume level drops below
This Trigger fires every time your device volume level is below the value you specified.
Wind speed rises above
This Trigger fires every time your device detects wind speed higher than the value you specified.
Wind speed drops below
This Trigger fires every time your device detects wind speed lower than the value you specified.
Battery below
This Trigger fires every time your device's battery level falls below the value you specified.
Alarm turns on
This Trigger fires every time your device's alarm is turned on.
Alarm turns off
This Trigger fires every time your device's alarm is turned off.
Queries (With)
-
History of alarm turned on
This query returns a list of events when the alarm was turned on.
-
Robot Online
This Query returns the online status of your robot.
-
History of battery below specified value
This query returns a list of recent times your battery fell below a specified value. Note: this query will only return future events after this Applet is created.
-
Robot Status
This Query returns the current status of your robot, as well as the time of its next scheduled job.
-
History of when wind speed dropped below a threshold
This query returns a list of when your device detects wind speed lower than the value you specified. Note: this query will only return future events after this Applet is created.
-
History of Bin full alerts
This query returns a list of times when Roomba alerted that its bin was full.
-
History of Binary switch offs
This query returns a list of when your device's binary switch was turned off.
-
History of robot started
This query returns a list of when your robot starts a job.
-
History of brightness level rises above
This query returns a list of when your device detects a brightness level above the value you specified. Note: this query will only return future events after this Applet is created.
-
History of robot stuck
This query returns a list of when your robot was stuck.
-
History of alarm turns off
This query returns a list of when your device's alarm was turned off.
-
History of job complete
This query returns a list of when your robot completes a job.
-
History of player state changes
This query returns a list of when your device player's state changes to the value you specified.
-
History of volume level drops below a threshold
This query returns a list of when your device volume level was below the value you specified. Note: this query will only return future events after this Applet is created.
-
History of CO2 level rises above a threshold
This query returns a list of when your device detected a CO2 level above the value you specified. Note: this query will only return future events after this Applet is created.
-
History of Weather Station reports night
This query returns a list of when the Weather Station reports night.
-
History of brightness level dropping below specified value
This query returns a list of when your device brightness level was below the value you specified. Note: this query will only return future events after this Applet is created.
-
Histor of wind speed rises
This query returns a list of instances when your device detected wind speed higher than the value you specified. Note: this query will only return future events after this Applet is created.
History of alarm turned on
This query returns a list of events when the alarm was turned on.
Robot Online
This Query returns the online status of your robot.
History of battery below specified value
This query returns a list of recent times your battery fell below a specified value. Note: this query will only return future events after this Applet is created.
Robot Status
This Query returns the current status of your robot, as well as the time of its next scheduled job.
History of when wind speed dropped below a threshold
This query returns a list of when your device detects wind speed lower than the value you specified. Note: this query will only return future events after this Applet is created.
History of Bin full alerts
This query returns a list of times when Roomba alerted that its bin was full.
History of Binary switch offs
This query returns a list of when your device's binary switch was turned off.
History of robot started
This query returns a list of when your robot starts a job.
History of brightness level rises above
This query returns a list of when your device detects a brightness level above the value you specified. Note: this query will only return future events after this Applet is created.
History of robot stuck
This query returns a list of when your robot was stuck.
History of alarm turns off
This query returns a list of when your device's alarm was turned off.
History of job complete
This query returns a list of when your robot completes a job.
History of player state changes
This query returns a list of when your device player's state changes to the value you specified.
History of volume level drops below a threshold
This query returns a list of when your device volume level was below the value you specified. Note: this query will only return future events after this Applet is created.
History of CO2 level rises above a threshold
This query returns a list of when your device detected a CO2 level above the value you specified. Note: this query will only return future events after this Applet is created.
History of Weather Station reports night
This query returns a list of when the Weather Station reports night.
History of brightness level dropping below specified value
This query returns a list of when your device brightness level was below the value you specified. Note: this query will only return future events after this Applet is created.
Histor of wind speed rises
This query returns a list of instances when your device detected wind speed higher than the value you specified. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Run scene
This Action will run a scene.
-
Resume robot
This action will resume your robot.
-
Switch on
This Action will turn on your devices that support switching on.
-
Locate robot
This action will locate your robot.
-
Switch off
This Action will turn off your devices that support switching off.
-
Dock robot
This action will dock your robot.
-
Set light level
This Action will set level on your lighting devices that support dimming.
-
Start robot
This action will start your robot.
-
Set volume
This Action will set volume on your media player devices that support volume.
-
Stop robot
This action will stop your robot.
-
Set player control
This Action will control your media player devices.
-
Pause robot
This action will pause your robot.
-
Set thermostat setpoint
This action will change the thermostat setpoint.
-
Clean by Room
This action will clean a specific room in your home. For robots with Imprint™ Smart Mapping technology.
-
Run KNX scene
This action will run a KNX scene.
-
Vacuum and Mop Everywhere
This action will start a Vacuum and Mop Everywhere job. For Roomba Combo™ j7 robots only.
-
Change shutter/blinds position
This action will change the shutter/blinds position.
-
Vacuum and Mop a Room
This action will start a vacuum + mop job a specific room in your home. For Roomba Combo™ j7 robots only.
-
Set color
This Action will change the color of your lights. NOTE: Accepts color names and CSS hex color values. Defaults to white if no color match is found.
-
Play playlist
This action will play a playlist.
-
Play favorite
This action will play an item from the favorites.
Run scene
This Action will run a scene.
Resume robot
This action will resume your robot.
Switch on
This Action will turn on your devices that support switching on.
Locate robot
This action will locate your robot.
Switch off
This Action will turn off your devices that support switching off.
Dock robot
This action will dock your robot.
Set light level
This Action will set level on your lighting devices that support dimming.
Start robot
This action will start your robot.
Set volume
This Action will set volume on your media player devices that support volume.
Stop robot
This action will stop your robot.
Set player control
This Action will control your media player devices.
Pause robot
This action will pause your robot.
Set thermostat setpoint
This action will change the thermostat setpoint.
Clean by Room
This action will clean a specific room in your home. For robots with Imprint™ Smart Mapping technology.
Run KNX scene
This action will run a KNX scene.
Vacuum and Mop Everywhere
This action will start a Vacuum and Mop Everywhere job. For Roomba Combo™ j7 robots only.
Change shutter/blinds position
This action will change the shutter/blinds position.
Vacuum and Mop a Room
This action will start a vacuum + mop job a specific room in your home. For Roomba Combo™ j7 robots only.
Set color
This Action will change the color of your lights. NOTE: Accepts color names and CSS hex color values. Defaults to white if no color match is found.
Play playlist
This action will play a playlist.
Play favorite
This action will play an item from the favorites.
How to connect Hager IoT and iRobot
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Hager IoT and iRobot accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!Upgrade your automations with
-
Connect to more Applets
Connect up to 20 automations with Pro, and unlimited automations with Pro+ -
Add multiple actions with exclusive services
Add real-time data and multiple actions for smarter automations -
Get access to faster speeds
Get faster updates and more actions with higher rate limits and quicker checks
More on Discord and Instagram
About Hager IoT
Hager IoT Controller (TJA560) is a gateway that enhances your KNX electrical installation by making it compatible with tens of connected objects.
Hager IoT Controller (TJA560) is a gateway that enhances your KNX electrical installation by making it compatible with tens of connected objects.
About iRobot
iRobot® Wi-Fi® Connected Robots give you the flexibility of anytime, anywhere control. Applets can trigger your robot to start when you leave the house, pause cleaning when you answer the phone—even fire off a tweet when your job is complete.
iRobot® Wi-Fi® Connected Robots give you the flexibility of anytime, anywhere control. Applets can trigger your robot to start when you leave the house, pause cleaning when you answer the phone—even fire off a tweet when your job is complete.