Switch on Ecobee ventilation when Air Quality is poor
Other popular Foobot workflows and automations
-
31
-
-
When pollution is high, set fan to on
15
-
-
Record air quality measurements once per hour
1
-
-
Slack me if Pollution rises above threshold
5
-
-
Run my Nexia automation when the VOC threshold is crossed
-
-
Call to cancel events when air pollution is high on Foobot
-
-
Turn on WeMo Switch when air quality is poor
6
-
-
Turn On my Fan when VOC Threshold is crossed in Foobot
-
-
Foobot Email
7
-
Build your own Foobot and WeMo Maker automations
Triggers (If this)
-
Pollution is high
This Trigger fires when global air pollution is higher than 50.
-
Relay on
This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.
-
New air quality reading
This Trigger fires when a new air quality reading is available.
-
Relay off
This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.
-
Knock knock
This Trigger fires every time you double tap (knock knock) on your Foobot.
-
Momentary on
This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.
-
Temperature threshold is crossed
This Trigger fires every time the temperature sensor value is above or below the threshold.
-
Sensor triggered
This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.
-
Humidity threshold is crossed
This Trigger fires every time the humidity sensor value is above or below the threshold.
-
Sensor not triggered
This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.
-
PM threshold is crossed
This Trigger fires every time the PM (particulate matter) sensor value is above or below the threshold.
-
VOC threshold is crossed
This Trigger fires every time the VOC (volatile organic compound) sensor value is above or below the threshold.
-
CO₂ threshold is crossed
This Trigger fires every time the CO₂ (carbon dioxid) sensor value is above or below the threshold.
Pollution is high
This Trigger fires when global air pollution is higher than 50.
Relay on
This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.
New air quality reading
This Trigger fires when a new air quality reading is available.
Relay off
This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.
Knock knock
This Trigger fires every time you double tap (knock knock) on your Foobot.
Momentary on
This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.
Temperature threshold is crossed
This Trigger fires every time the temperature sensor value is above or below the threshold.
Sensor triggered
This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.
Humidity threshold is crossed
This Trigger fires every time the humidity sensor value is above or below the threshold.
Sensor not triggered
This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.
PM threshold is crossed
This Trigger fires every time the PM (particulate matter) sensor value is above or below the threshold.
VOC threshold is crossed
This Trigger fires every time the VOC (volatile organic compound) sensor value is above or below the threshold.
CO₂ threshold is crossed
This Trigger fires every time the CO₂ (carbon dioxid) sensor value is above or below the threshold.
Queries (With)
-
History of being turned on in momentary mode
This query returns a list of when your WeMo Maker relay was turned on in momentary mode.
-
History of air quality readings
This query returns a list of new air quality readings available.
-
History of times a signal was not detected by an enabled sensor
This query returns a list of times a signal was not detected by an enabled sensor.
-
History of humidity threshold is crossed
This query returns a list of when the humidity sensor value was above or below the threshold. Note: this query will only return future events after this Applet is created.
-
History of times a signal was detected by an enabled sensor
This query returns a list of times a signal was detected by an enabled sensor.
-
History of VOC threshold is crossed
This query returns a list of when the VOC (volatile organic compound) sensor value was above or below the threshold. Note: this query will only return future events after this Applet is created.
-
History of relay offs
This query returns a list of when your WeMo Maker relay was turned off in toggle mode.
-
History of PM threshold was crossed
This query returns a list of times when the PM (particulate matter) sensor value crossed a threshold. Note: this query will only return future events after this Applet is created.
-
History of relay ons
This query returns a list of when your WeMo Maker relay was turned on in toggle mode.
History of being turned on in momentary mode
This query returns a list of when your WeMo Maker relay was turned on in momentary mode.
History of air quality readings
This query returns a list of new air quality readings available.
History of times a signal was not detected by an enabled sensor
This query returns a list of times a signal was not detected by an enabled sensor.
History of humidity threshold is crossed
This query returns a list of when the humidity sensor value was above or below the threshold. Note: this query will only return future events after this Applet is created.
History of times a signal was detected by an enabled sensor
This query returns a list of times a signal was detected by an enabled sensor.
History of VOC threshold is crossed
This query returns a list of when the VOC (volatile organic compound) sensor value was above or below the threshold. Note: this query will only return future events after this Applet is created.
History of relay offs
This query returns a list of when your WeMo Maker relay was turned off in toggle mode.
History of PM threshold was crossed
This query returns a list of times when the PM (particulate matter) sensor value crossed a threshold. Note: this query will only return future events after this Applet is created.
History of relay ons
This query returns a list of when your WeMo Maker relay was turned on in toggle mode.
Actions (Then that)
-
Turn relay on
This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.
-
Turn relay off
This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.
-
Toggle relay
This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.
-
Turn relay off then on
This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.
-
Turn relay on then off
This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.
-
Turn relay on momentarily
This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.
-
Turn relay on momentarily multiple times
This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.
-
Turn relay on then off multiple times
This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.
-
Turn relay off then on multiple times
This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.
Turn relay on
This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.
Turn relay off
This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.
Toggle relay
This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.
Turn relay off then on
This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.
Turn relay on then off
This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.
Turn relay on momentarily
This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.
Turn relay on momentarily multiple times
This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.
Turn relay on then off multiple times
This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.
Turn relay off then on multiple times
This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.
How to connect Foobot and WeMo Maker
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Foobot and WeMo Maker accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together