If CO2 level reaches 1200 ppm, then Send Normal notification to TIME
Other popular Airthings workflows and automations
-
-
-
Get a notification when it's getting cold
62
-
-
If radon levels fall below 3.5 pCi/L, then turn off HS103(US) Exhaust Fan
2
-
-
Switch off WeMo Smart Plug to turn off a fan if Radon levels are low
5
-
-
Set Airthings air purifier into boost mode when air quality gets bad
-
-
Send me an email when my radon is high
152
-
-
Turn my hue lights red when radon is high
19
-
-
Flash Hue Light if humidity level is high
3
-
-
Flash Hue Light if radon level is high
13
-
Build your own Airthings and SwitchBot automations
Triggers (If this)
-
Radon level above threshold
This trigger fires when the radon level for a device rises above the provided threshold.
-
Robot status changed
This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed
-
Radon level below threshold
This trigger fires when radon level of a device falls below the provided threshold.
-
温度・湿度の変化
温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。
-
TVOC level above threshold
This trigger fires when the TVOC level for a device rises above the provided threshold.
-
Water Detector State
You can use the Water Detector state as a condition to trigger an automation.
-
TVOC level below threshold
This trigger fires when the TVOC level for a device falls below the provided threshold.
-
ロボット状態変更
このトリガーはロボットの状態が変更した時に実行します
-
CO2 level below threshold
This trigger fires when the CO2 level for a device falls below the provided threshold.
-
Carbon dioxide changes
Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.
-
CO2 level above threshold
This trigger fires when the CO2 level for a device rises above the provided threshold.
-
Power changes
You can choose Plug Mini's behaviour as a trigger condition
-
Air pressure level above threshold
This trigger fires when the air pressure level for a device rises above the provided threshold.
-
水漏れセンサーの状態
水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。
-
Air pressure level below threshold
This trigger fires when the air pressure level for a device falls below the provided threshold.
-
電源の変化
プラグミニの状態をアクション実行条件として設定できます
-
Humidity rises above threshold
This trigger fires when the humidity of a device rises above the provided threshold.
-
Hub 2's touch buttons pressed
This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.
-
Humidity falls below threshold
This trigger fires when the humidity of a device falls below the provided threshold.
-
ハブ２のタッチボタンを押す
SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。
-
Temperature above threshold
This trigger fires when the temperature of a device rises above the provided threshold.
-
Temperature or humidity changes
Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).
-
Temperature below threshold
This trigger fires when the temperature of a device falls below the provided threshold.
-
動体が検出された、または検出されない
動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。
-
Mold risk level above threshold
This trigger fires when the mold risk level for a device rises above the provided threshold.
-
Motion detected or no motion detected
When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.
-
Mold risk level below threshold
This trigger fires when the mold risk level of a device falls below the provided threshold.
-
開閉と動体を検知する
開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。
-
PM2.5 above threshold
This trigger fires when the PM2.5 level for a device rises above the provided threshold.
-
Contact and Motion Detection
When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.
-
PM2.5 below threshold
This trigger fires when the PM2.5 level for a device rises below the provided threshold.
-
ロック状態変更
このトリガーはロックの状態が変更した時に実行する
-
Noise level above threshold
This trigger fires when the noise level for a device rises above the provided threshold.
-
Lock status changed
This trigger fires when the status of your SwitchBot Lock is changed.
-
Noise level below threshold
This trigger fires when the noise level for a device falls below the provided threshold.
-
Light level above threshold
This trigger fires when the light level for a device rises above the provided threshold.
-
Light level below threshold
This trigger fires when the light level for a device falls below the provided threshold.
Radon level above threshold
This trigger fires when the radon level for a device rises above the provided threshold.
Robot status changed
This trigger fires when the status of your SwitchBot Robot Vacuum Cleaner changed
Radon level below threshold
This trigger fires when radon level of a device falls below the provided threshold.
温度・湿度の変化
温度・湿度の変化を検出された時、SwitchBot温湿度計（メーター）が「THAT」サービスをトリガーにします。例えば、温度が27度より高い時、SwitchBot Hub PlusでエアコンをONにします。
TVOC level above threshold
This trigger fires when the TVOC level for a device rises above the provided threshold.
Water Detector State
You can use the Water Detector state as a condition to trigger an automation.
TVOC level below threshold
This trigger fires when the TVOC level for a device falls below the provided threshold.
ロボット状態変更
このトリガーはロボットの状態が変更した時に実行します
CO2 level below threshold
This trigger fires when the CO2 level for a device falls below the provided threshold.
Carbon dioxide changes
Whenever a preset carbon dioxide change detected, SwitchBot meter pro will try to trigger the service. E.g. if the carbon dioxide is too high, turn on SwitchBot air purifier.
CO2 level above threshold
This trigger fires when the CO2 level for a device rises above the provided threshold.
Power changes
You can choose Plug Mini's behaviour as a trigger condition
Air pressure level above threshold
This trigger fires when the air pressure level for a device rises above the provided threshold.
水漏れセンサーの状態
水漏れセンサーの水漏れ/水位低下状態をトリガー条件として設定することが可能です。
Air pressure level below threshold
This trigger fires when the air pressure level for a device falls below the provided threshold.
電源の変化
プラグミニの状態をアクション実行条件として設定できます
Humidity rises above threshold
This trigger fires when the humidity of a device rises above the provided threshold.
Hub 2's touch buttons pressed
This trigger fires when one of the touch buttons of your Hub 2 is pressed. E.g. when the left touch button is pressed, turn on SwitchBot Color Bulb.
Humidity falls below threshold
This trigger fires when the humidity of a device falls below the provided threshold.
ハブ２のタッチボタンを押す
SwitchBotハブ２のタッチボタンを押すことをトリガー条件として設定することが可能です。例えば：ハブ２の左ボタンを押すと、SwitchBotスマート電球をオンにします。
Temperature above threshold
This trigger fires when the temperature of a device rises above the provided threshold.
Temperature or humidity changes
Whenever a preset temperature and/or humidity change detected, SwitchBot Thermometer & Hygrometer (the Meter) will try to trigger the service. E.g. if the temperature is too high, turn on AC with the SwitchBot Hub Plus (the Hub Plus).
Temperature below threshold
This trigger fires when the temperature of a device falls below the provided threshold.
動体が検出された、または検出されない
動体検知の結果によって、SwitchBot人感センサーがサービスをトリガーします。
Mold risk level above threshold
This trigger fires when the mold risk level for a device rises above the provided threshold.
Motion detected or no motion detected
When Motion Sensor detected motion or no motion, the SwitchBot motion sensor will try to trigger the service.
Mold risk level below threshold
This trigger fires when the mold risk level of a device falls below the provided threshold.
開閉と動体を検知する
開閉状態の検知結果によって、SwitchBot開閉センサーがサービスをトリガーします。
PM2.5 above threshold
This trigger fires when the PM2.5 level for a device rises above the provided threshold.
Contact and Motion Detection
When Contact Sensor detected door/window opened or closed or left open, the SwitchBot contact sensor will try to trigger the service.
PM2.5 below threshold
This trigger fires when the PM2.5 level for a device rises below the provided threshold.
ロック状態変更
このトリガーはロックの状態が変更した時に実行する
Noise level above threshold
This trigger fires when the noise level for a device rises above the provided threshold.
Lock status changed
This trigger fires when the status of your SwitchBot Lock is changed.
Noise level below threshold
This trigger fires when the noise level for a device falls below the provided threshold.
Light level above threshold
This trigger fires when the light level for a device rises above the provided threshold.
Light level below threshold
This trigger fires when the light level for a device falls below the provided threshold.
Queries (With)
-
History of CO2 level above threshold
This query returns a list of when the CO2 level for a device rises above the provided threshold. Note: this query will only return future events after this Applet is created.
-
History of Radon level exceeded threshold
This query returns a list of events when the radon level for a device rose above the provided threshold. Note: this query will only return future events after this Applet is created.
-
History of humidity falls below threshold
This query returns a list of when the humidity of a device falls below the provided threshold. Note: this query will only return future events after this Applet is created.
-
History of air pressure level above threshold
This query returns a list of when the air pressure level for a device rises above the provided threshold. Note: this query will only return future events after this Applet is created.
-
History of temperature below threshold
This query returns a list of when the temperature of a device falls below the provided threshold. Note: this query will only return future events after this Applet is created.
-
History of TVOC level below threshold
This query returns a list of when the TVOC level for a device fell below the provided threshold. Note: this query will only return future events after this Applet is created.
-
History of CO2 level drops
This query returns a list of instances when the CO2 level for a device fell below the provided threshold. Note: this query will only return future events after this Applet is created.
History of CO2 level above threshold
This query returns a list of when the CO2 level for a device rises above the provided threshold. Note: this query will only return future events after this Applet is created.
History of Radon level exceeded threshold
This query returns a list of events when the radon level for a device rose above the provided threshold. Note: this query will only return future events after this Applet is created.
History of humidity falls below threshold
This query returns a list of when the humidity of a device falls below the provided threshold. Note: this query will only return future events after this Applet is created.
History of air pressure level above threshold
This query returns a list of when the air pressure level for a device rises above the provided threshold. Note: this query will only return future events after this Applet is created.
History of temperature below threshold
This query returns a list of when the temperature of a device falls below the provided threshold. Note: this query will only return future events after this Applet is created.
History of TVOC level below threshold
This query returns a list of when the TVOC level for a device fell below the provided threshold. Note: this query will only return future events after this Applet is created.
History of CO2 level drops
This query returns a list of instances when the CO2 level for a device fell below the provided threshold. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Bot turn off
This action will trigger the specified Bot to turn off the switch.
-
Renew air purifier boost mode
Runs on top speed
for 1 hour.
-
Bot press
This action will trigger the specified Bot to press the switch.
-
Renew air purifier manual mode
Set manual operation
of the 5 speeds.
-
Bot turn on
This action will trigger the specified Bot to turn on the switch.
-
Renew air purifier silent mode
Runs on the lowest
speed for 8 hours with
panel lights dimmed.
-
Turn A/C off
This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.
-
Renew air purifier auto mode
Set & forget. Adjusts fan
speed based on current
air quality.
-
Turn A/C on
This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.
-
Renew air purifier standby mode
Turns the purifier
function off. The air quality sensor
continues to operate.
-
Turn on appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.
-
Turn off appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.
-
Turn Plug on
This action will turn on your Plug.
-
Turn Plug off
This action will turn off your Plug.
-
Control TV
This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.
-
Control home appliances
This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App.
Note: Please use other actions if your appliance type is known to the App for a better experience
-
Fan 2 送風モード
4つの送風モードを切り替えます。
-
Control Fan
This Action will control the SwitchBot Smart Fan.
-
Fan 2 Blowing Mode
You can switch between 4 blowing modes.
-
Fan 2 Nightlight
You can set the nightlight status of your Air Circulator Fan.
-
Fan 2 常夜灯設定
常夜灯の明るさを調整できます。
-
Fan 2 Horizontal Oscillation
You can set the Horizontal Oscillation to turn on or turn off.
-
Fan 2 左右の首振り
首振りモードを設定できます。
-
Fan 2 Vertical Oscillation
You can set the Vertical Oscillation to turn on or turn off.
-
Fan 2 上下の首振り
上下の首振りモードを設定できます。
-
fan 2 Fan Speed
You can set the fan speed.
-
fan 2 風量
風量を調整できます。
-
扇風機をコントロール
このアクションはSwitchBotスマート扇風機を操作できます。
-
Control Humidifier
This Action will control the SwitchBot Smart Humidifier.
-
Control Evaporative Humidifier
This Action will control the SwitchBot Evaporative Humidifier.
-
気化式加湿器をコントロール
このアクションは、SwitchBotスマート気化式加湿器を制御します。
-
加湿器をコントロール
このアクションは、SwitchBotスマート加湿器を制御します。
-
Scene
Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.
-
シーン
SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）
-
Control Curtain
This Action will control the SwitchBot Curtain.
-
カーテンをコントロール
このアクションは、SwitchBotカーテンを制御します。
-
Turn Bulb On/Off
You can set the on/off state of your Color Bulb here.
-
電球をオン/オフにする
本ページで電球の状態を設定できます
-
Bulb Brightness
You can set the brightness of your Color Bulb here.
-
電球の明るさ
本ページで電球の明るさを設定できます
-
Bulb Color
You can set the color of your Color Bulb here.
-
電球のカラー
本ページで電球のカラーを設定できます
-
Bulb Color Temperature
You can set the color temperature of your Color bulb here.
-
電球の色温度
本ページで電球のカラーを設定できます
-
Bulb Presets
You can set the presets saved in your SwitchBot app here.
-
電球のプリセット
本ページでSwitchBotアプリに保存されたプリセットを設定できます
-
Start vacuuming
The robot will start vacuuming
-
清掃する
ロボットは清掃を開始します
-
Pause vacuuming (Pause recharging)
The robot will pause vacuuming (pause recharging)
-
清掃/再充電を一時停止
ロボットは清掃/再充電を一時停止します
-
再充電する
ロボットは充電に帰還します
-
Start recharging
The robot will start recharging
-
Switch Mode
The robot will switch mode
-
モード切替
ロボットは吸引力のモードを切り替えます
-
Turn Ceiling Light On/Off
You can set your Ceiling Light to be turned on/off.
-
シーリングライトをオン/オフ
シーリングライトのオン/オフを設定できます
-
トグルシーリングライト（オン/オフ）
トグルシーリングライト（オン/オフ）
-
Toggle Ceiling Light On/Off
Toggle Ceiling Light On/Off
-
シーリングライトの色温度
シーリングライトの色温度を設定できます
-
Ceiling Light Color Temperature
You can set the color temperature of your Ceiling Light here.
-
Ceiling Light Brightness
You can set the brightness of your Ceiling Light here.
-
シーリングライトの明るさ
シーリングライトの明るさを設定できます
-
Open/close Blind Tilt
This action will open/close Blind Tilt up or down and to a specific percentage.
-
ブラインドポールの開閉を設定
ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。
-
Control Air Purifier
This Action will control the SwitchBot Air Purifier.
-
Control RollerShade
This Action will control the SwitchBot RollerShade.
-
Change water output for mopping
Change water output for mopping
-
水拭きの水量を変更
水拭きの水量を変更
-
Start purity in situ
The platform will purity in situ
-
Start purity whole house
The platform will purity whole house
-
Start cruise whole house
The platform will cruise whole house
-
Back to base station
The platform will back to base station
-
原位置除染を開始する
原位置除染を開始する
-
家全体の浄化を始める
家全体の浄化を始める
-
ハウスツアーを開始する
ハウスツアーを開始する
-
基地局への復帰を開始する
基地局への復帰を開始する
-
LED Strip Light On/Off
You can set the on/off state of your Strip Light here.
-
テープライトをオン/オフにする
本ページでテープライトの状態を設定できます
-
LED Strip Light Color
You can set the color of Strip Light on this page.
-
テープライトのカラー
本ページでテープライトのカラーを設定できます
-
Power On/Off
You can set the Plug Mini's action
-
Toggle On/Off
You can set the Plug Mini's action
-
Delay On/Off
You can set the Plug Mini's action
-
電源オン/オフ
プラグミニの実行アクションを設定できます
-
トグル（オン/オフ）
プラグミニの実行アクションを設定できます
-
遅延実行（オン/オフ）
プラグミニの実行アクションを設定できます
Bot turn off
This action will trigger the specified Bot to turn off the switch.
Renew air purifier boost mode
Runs on top speed
for 1 hour.
Bot press
This action will trigger the specified Bot to press the switch.
Renew air purifier manual mode
Set manual operation
of the 5 speeds.
Bot turn on
This action will trigger the specified Bot to turn on the switch.
Renew air purifier silent mode
Runs on the lowest
speed for 8 hours with
panel lights dimmed.
Turn A/C off
This action will ask SwitchBot Hub Plus to turn off your paired air conditioner.
Renew air purifier auto mode
Set & forget. Adjusts fan
speed based on current
air quality.
Turn A/C on
This action will ask SwitchBot Hub Plus to turn on or set your paired air conditioner with predefined mode, temperature and fan speed.
Renew air purifier standby mode
Turns the purifier
function off. The air quality sensor
continues to operate.
Turn on appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn on your paired appliance with the IR remote feature.
Turn off appliance with Hub Plus IR remote
This action will ask SwitchBot Hub Plus to turn off your paired appliance with the IR remote feature.
Turn Plug on
This action will turn on your Plug.
Turn Plug off
This action will turn off your Plug.
Control TV
This action will ask SwitchBot Hub Plus to send an infrared signal to control TV.
Control home appliances
This action will ask SwitchBot Hub Plus to send an infrared signal to control any "Others" types of appliances set in the SwitchBot App.
Note: Please use other actions if your appliance type is known to the App for a better experience
Fan 2 送風モード
4つの送風モードを切り替えます。
Control Fan
This Action will control the SwitchBot Smart Fan.
Fan 2 Blowing Mode
You can switch between 4 blowing modes.
Fan 2 Nightlight
You can set the nightlight status of your Air Circulator Fan.
Fan 2 常夜灯設定
常夜灯の明るさを調整できます。
Fan 2 Horizontal Oscillation
You can set the Horizontal Oscillation to turn on or turn off.
Fan 2 左右の首振り
首振りモードを設定できます。
Fan 2 Vertical Oscillation
You can set the Vertical Oscillation to turn on or turn off.
Fan 2 上下の首振り
上下の首振りモードを設定できます。
fan 2 Fan Speed
You can set the fan speed.
fan 2 風量
風量を調整できます。
扇風機をコントロール
このアクションはSwitchBotスマート扇風機を操作できます。
Control Humidifier
This Action will control the SwitchBot Smart Humidifier.
Control Evaporative Humidifier
This Action will control the SwitchBot Evaporative Humidifier.
気化式加湿器をコントロール
このアクションは、SwitchBotスマート気化式加湿器を制御します。
加湿器をコントロール
このアクションは、SwitchBotスマート加湿器を制御します。
Scene
Run the Scene you previously set in the SwitchBot App. Only manual execution types are allowed.
シーン
SwitchBot アプリで作成したシーンを実行します。（ご注意：手動実行するシーンのみ）
Control Curtain
This Action will control the SwitchBot Curtain.
カーテンをコントロール
このアクションは、SwitchBotカーテンを制御します。
Turn Bulb On/Off
You can set the on/off state of your Color Bulb here.
電球をオン/オフにする
本ページで電球の状態を設定できます
Bulb Brightness
You can set the brightness of your Color Bulb here.
電球の明るさ
本ページで電球の明るさを設定できます
Bulb Color
You can set the color of your Color Bulb here.
電球のカラー
本ページで電球のカラーを設定できます
Bulb Color Temperature
You can set the color temperature of your Color bulb here.
電球の色温度
本ページで電球のカラーを設定できます
Bulb Presets
You can set the presets saved in your SwitchBot app here.
電球のプリセット
本ページでSwitchBotアプリに保存されたプリセットを設定できます
Start vacuuming
The robot will start vacuuming
清掃する
ロボットは清掃を開始します
Pause vacuuming (Pause recharging)
The robot will pause vacuuming (pause recharging)
清掃/再充電を一時停止
ロボットは清掃/再充電を一時停止します
再充電する
ロボットは充電に帰還します
Start recharging
The robot will start recharging
Switch Mode
The robot will switch mode
モード切替
ロボットは吸引力のモードを切り替えます
Turn Ceiling Light On/Off
You can set your Ceiling Light to be turned on/off.
シーリングライトをオン/オフ
シーリングライトのオン/オフを設定できます
トグルシーリングライト（オン/オフ）
トグルシーリングライト（オン/オフ）
Toggle Ceiling Light On/Off
Toggle Ceiling Light On/Off
シーリングライトの色温度
シーリングライトの色温度を設定できます
Ceiling Light Color Temperature
You can set the color temperature of your Ceiling Light here.
Ceiling Light Brightness
You can set the brightness of your Ceiling Light here.
シーリングライトの明るさ
シーリングライトの明るさを設定できます
Open/close Blind Tilt
This action will open/close Blind Tilt up or down and to a specific percentage.
ブラインドポールの開閉を設定
ブラインドポールを特定の位置まで開ける/閉めるに設定可能です。
Control Air Purifier
This Action will control the SwitchBot Air Purifier.
Control RollerShade
This Action will control the SwitchBot RollerShade.
Change water output for mopping
Change water output for mopping
水拭きの水量を変更
水拭きの水量を変更
Start purity in situ
The platform will purity in situ
Start purity whole house
The platform will purity whole house
Start cruise whole house
The platform will cruise whole house
Back to base station
The platform will back to base station
原位置除染を開始する
原位置除染を開始する
家全体の浄化を始める
家全体の浄化を始める
ハウスツアーを開始する
ハウスツアーを開始する
基地局への復帰を開始する
基地局への復帰を開始する
LED Strip Light On/Off
You can set the on/off state of your Strip Light here.
テープライトをオン/オフにする
本ページでテープライトの状態を設定できます
LED Strip Light Color
You can set the color of Strip Light on this page.
テープライトのカラー
本ページでテープライトのカラーを設定できます
Power On/Off
You can set the Plug Mini's action
Toggle On/Off
You can set the Plug Mini's action
Delay On/Off
You can set the Plug Mini's action
電源オン/オフ
プラグミニの実行アクションを設定できます
トグル（オン/オフ）
プラグミニの実行アクションを設定できます
遅延実行（オン/オフ）
プラグミニの実行アクションを設定できます
How to connect Airthings and SwitchBot
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Airthings and SwitchBot accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!Top integration tips, tools, and resources
IFTTT helps all your apps and devices work better together